(as of Sep 19,2022 19:04:33 UTC – Details)
- Voltage: 36V or 48V (universal)
- Rated current: min 11A
- Voltage: DC30/40±0.5V Max.
- Current: 22±1A Speed setting: 1-4.2V
- Brake input: low level
- Size: 125*66*38mm(4.9*2.6*1.5in)
- Color: silver
- Weight: about 356g
Support KT display If the controller is connected to the system, the display is normal, but the PAS cannot assist in normal work, please adjust the PAS parameters in the display, and it can be used normally after adjustment. If you don’t have an instrument manual, please email me.
【Before You Buy】The KUTENG ebike controller uses the KT communication protocol, which is only compatible with KT brand display (KT-LCD3 LCD4 LCD5 LCD6 LCD7 LCD8). Please check your controller nameplate before placing an order.
【Consistent Quality】The controller board is very stable, using 9 stable Moss tubes, which can withstand a maximum current of 22A in a short time. When the temperature is too high, the controller will cut off the current to protect the safety of the entire system.
【Good Heat Dissipation】The controller shell is made of aluminum alloy with grooves, and the good heat dissipation can protect the wires from damage and avoid thermal overload.
【Clear Connectors】 Each connector has its own characteristics, reducing confusion during installation. We’ve included pictures of each plug’s name for your convenience.
【Wide application】 This electric bike brushless motor controller is suitable for 36V/48V 500W mountain road bikes, electric scooters, etc.
【Logistics & warehousing】 We use Amazon’s warehouse and logistics, your order will be shipped to you through Amazon’s nearest warehouse